The DPA Microphones 6060 CORE Omni Submini Mic, Normal SPL, is just 3 mm (0.12 in) in size but packs the audio power of DPAs larger, award-winning mics. What they lack in size, they more than make up for in clarity, consistency and durabilitythree qualities that really matter. By shrinking CORE by DPA technology, DPA ensures you don't have to compromise on sound to focus on aesthetics.Shrinking CORE into a 3 mmCORE by DPA is a powerful new technology at the heart of DPAs miniature microphones. Theyve minimized distortionfrom a whisper to a scream, you will experience increased clarity and openness.DPA has also taken their CORE technology and shrunk it down to fit into their (0.12 in) subminiature mics. This means that, despite their small size, the performance of the 6060 CORE Subminiature Series is fully comparable to the 5 mm (0.20 in) miniature capsules that are beloved around the globe. These subminiatures have a lower noise floor and they are better able to capture high sound pressure levels without distortion.Advanced new mic designThis tiny capsule has a cap that can be removed for cleaning and should be firmly reattached to the mic body with a firm click that can both be felt and heard. The supplied cap corresponds in its nature to the low-boost grid of DPAs 5 mm (0.20 in) versions. Both the mic itself plus the cap are made of stainless-steel and treated with a Physical vapor deposition (PVD) coating that makes it extremely durable: able to tolerate high temperatures, resilient against impacts and resistant to abrasion. The entire subminiature lavalier mic has a pleasant matte look due to the coating making the entire headset look smaller and less obtrusive.The cable is often the weak spot on these types of mics, but DPA has opted to use the same size cable ( 1.6 mm (.06 in)) and the same rugged cable relief as on their 5 mm (0.20 in) mics. The cables are extremely durable, do not become entangled and are equipped with an inner core made of Kevlar that withstands rough pulls. A strain relief is integrated in the mic housing to strengthen the assembly.The cable and capsule design ensure immunity to noisy wireless devices. These mics are typically connected to a wireless belt pack and we offer a comprehensive mix of adapters to suit the many wireless transmitters available. When used with an adapter, the connector is our MicroDot but we also offer hardwired terminations to suit the most popular systems from manufactures such as Shure and Sennheiser. All of our connectors are equipped with a rugged strain relief.IP58 certifiedThe CORE Subminiatures are IP58 certified. This durability is achieved through a number of defense mechanisms:Water-repellant nano-coating of the cover and housingHermetic sealing of the sensitive amplifier at the core of the micDual gold plating of the diaphragmAbout omnisAn omnidirectional microphone has sensitivity at all anglesin principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic.Omnis are most often used in film recording applications and broadcast environments as they pick up the sound most naturally compared to directional microphones. The omni does not suffer from proximity effect and is not as sensitive to wind, pop or handling noise. Even on a live stage, omnis are often used.Sometimes, omnidirectional microphones are not the first type an audio engineer thinks of when it comes to live performances with a huge PA system amplifying the voice pick-up from an actor. Yet due to the short distance to the sound source (using a hidden bodyworn or headset), very high levels can be obtained with DPA omnis without feedback issues. These subminiature lavalier mics can be heard on many (very loud) theater stages.
